MODELS EMN-12 AND EMN-14, FOOT OPERATED PRECISION DOUBLE MITER CUT- OFF SAWS

Extremely versatile. Sawblades will cut nearly any material in one cycle of the sawheads, not repeated chopper-like passes. Each cut is a finish cut suitable for assembly. No material supports are necessary since no pressure is exerted against the work piece. Will easily cut any flat shape, and with fixturing will handle small reverses and shell- type mouldings.

FEATURES

TYPICAL USES

230 volt, 1 phase electric standard. No expensive electrical installation required.
Simple and effortless to use. Unskilled men or women become quite efficient and accomplished in operating this machine.
Side scrap discharge chute keeps scrap away from operator. Simple disposal into container
Machine is virtually maintenance free. eliminating costly downtime. Keeping blades sharp is your only requirement for continuous trouble-free operation.
Complete line of gages and quality carbide sawblades available.
No compressed air required

Custom picture frames
Aluminum store fronts
Silk screen frames
Do-it-yourself frame shops
Custom sign shops
Replacement windows and doors
Occupational training schools
Bath & shower enclosures
Sheltered workshops
Glass & mirror shops
Patio- porch & deck enclosures
Woodworking shops
Display manufacturers
Custom craft hobby shops

SPECIFICATIONS
Model:	EM-12	EM-14
Miter cutting capacity:	See cutting capacity chart
Standard Motor:	1 Horsepower	2 Horse power
Electrics:	208/230 volt, 1 phase, 60 cycle. 3450 RPM, totally enclosed, fan cooled, capacitor start induction run motor. When run at 50 Hz, motor RPM is reduced to 2950.
Amps: {total}
208/1/60	14.3	26.4
230/1/60*	13.0	24.0
208/3/60	7.1	12.3
230/3/60	6.4	11.2
460/3/60	3.2	5.6
220/1/50	12.2	22.4
575/2/60	2.6	4.5
380/3/50	3.4	6.8
240/3/50	5.6	11.2
415/3/50	1.6	3.2
*Standard motor supplied with machine.

Switch:	Pushbutton manual starter with under voltage protection, functions to start, stop and protect the motors against overload.
Drive:	Single poly- vee belt with matching pulleys on motors & spindles.
Arbor:	5/8" {15.88 mm standard}
Sawblade Capacity: {sawblade is not included}	12"	14"
Sawdust Exhaust:	One 5" OD { 127 MM} outlet requires approximately 850 CFM.
Air Consumption: {with optional air feed kit}	72 CFM at 65 PSI based on15 cycles per minute {1 /4 " air line minimum.}
Air Pressure:	65 PSI { 4.5 bar} only needed for air operated options.
Weight: {without accessories}
Crated {domestic}	410lbs. {186 kg}	505lbs. {229 kg}
Crated {export}	435lbs. {198 kg}	530lbs. {241 kg}
Uncrated	310lbs. {141 kg}	405lbs. {184 kg}
Table Height: {from floor & without skids}	35 1/2" {902mm}	36" {914mm}
Actuation:	Manual footpedal with counterbalanced automatic return with hydraulic dampening.
Production Rate:	Actual production rates vary with material profile, type of material and size of frame being cut. Cutting cycle time is typically 4 o 6 seconds.

Automated saw MN200 Prices